High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests are more inclined to return for another stay when they can customize their room to suit their preferences. However, providing these functions using old technology wastes plenty of energy. For instance, there are tons of difficulties with the old card key switches. Guests can put any card in the old switches, or they may ask for more than one card. Even though hotel desk refuses to offer more than one card to a guest, she/he might claim to have lost the credit card.
The standard old technology of hotel card switch. There is also a lot of over consumption of lights and AC energy as a result of things running even if guests aren’t in their rooms, and this may cause a financial loss for that owner. Obviously, no hotel owner wants to prohibit guests from having a comfortable stay, nor do owners expect guests to enter a dark or cold accommodation. No one is to blame. Both guests and hotel owners have the legal right to fulfill their interests.
Some hotel owners think when they separate the AC from your main network, less energy is going to be consumed, while some believe that motion sensors would be the solution. However, these approaches fail to resolve the situation. The AC is the most energy-consuming device of all, and motion sensors could be nightmares given that they only function based upon movement detection, meaning that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company supplies the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has many options, together with a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new method for hotel energy saving technology. By installing this door sensor on the entrance to your room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the problem of room occupancy is totally resolved.
The following logics may be defined with this sensor to control room energy with no discomfort for guests:
Logic 1: If there is any movement within the room, the occupancy mode is going to be on.
Logic 2: In the event the main door is closed and opened, a flag will activate for just one minute to see if there exists movement in room. If no movement is detected after 1 minute, the device will activate energy-saving mode. This is useful in situations when a guest enters the space briefly. In energy-saving mode all lighting is off aside from a nightlight, which stays on for 3 hours in case there is another guest getting a nap. Also, the AC is definitely not turned off, however its temperature will be decreased by 2 degrees. This helps save energy with time.
Logic 3: In the event the energy-saving mode is enabled without any movement is detected for over 3-5 hours, the nightlight and AC will be switched off automatically. It is additionally easy to define lower temperature levels for that AC. Furthermore, the power Servant can turn the AC on/off if it recognizes that a balcony window/door is open. This requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The light harvest sensor helps save energy by wscgid balcony lights off when there is enough natural light.
Another practical and beneficial capacity for this sensor is its built-in thermostat, which will help retain the right temperature all the time. This is very important to keep furniture fresh and intact. Also, in hot spots and even when the room is empty for some time, humidity and bad smells is not going to be a problem within the room. This sensor could be developed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This may happen repeatedly in the daytime if necessary. An identical performance may be programmed in cold spots to avoid mold.
Another choice with this smart system is TV control. In the event the hotel provides the guest with a room tablet, she/he will be able to control the room’s TV with it. This sensor was installed in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The result was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious stay at this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and needs with just a couple items and in the most energy efficient way possible. To learn more or even to plan a consultation, call us at www.tiscontrol.com